next up previous contents
Next: notch Up: XSPEC V10 Models Previous: mkcflow

mtable

A multiplicative table model. The filename to be used should be given immediately after mtable in the model command. For example

XSPEC> model mtable{mymod.mod} ...

uses mymod.mod as the input for the model. For specifications of the table model file, see the OGIP memo 92-009 on the FITS file format for table model files (available on the WWW or by anonymous ftp from legacy.gsfc.nasa.gov under caldb/docs/memos).



Keith Arnaud (kaa@genji.gsfc.nasa.gov)
Wed May 28 10:59:33 EDT 1997